|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| Type: | Lead-Acid Batteries |
| Usage: | Electric Power, Electric Bicycle |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
| Specifications: Designed according with the IEC60254-2014 | |||||||||||||||||||||||||||
| Nominal Voltage | 12Volts (6 Cells per unit) @25ºC |
ISO9001:2015 ISO14001:2015 ISO45001:2018 ISO50001:2011 |
|||||||||||||||||||||||||
| Nominal Capacity | |||||||||||||||||||||||||||
| 20hr -rate (3.75A) | 80.0Ah @ 1.75V per cell@25ºC (77ºF) 75.0AH @ 1.75V per cell@25ºC (77ºF) [email protected] cell@25ºC (77ºF) [email protected] cell@25ºC (77ºF) Approx.21.3 ± 3%kg(46.96lbs) |
||||||||||||||||||||||||||
| 10Hr-rate (7.50A) | |||||||||||||||||||||||||||
| 5Hr-rate(12.70A) | |||||||||||||||||||||||||||
| 3Hr-rate(18.70A) | |||||||||||||||||||||||||||
| Weight | |||||||||||||||||||||||||||
| Internal Resistance | Approx. 7.00mΩ full charged @25ºC 400A(3sec) |
||||||||||||||||||||||||||
| Maximum Discharge Current | |||||||||||||||||||||||||||
| Operating Temperature Range | Discharge: -20ºC~50ºC; Charge: 0ºC~40ºC Storage: -20ºC~40ºC |
APPLICATION STANDARDS ISO 7176-25 - 2013 IEC 60254- 1- 2005 SAE J1495-2018 UL1989 (MH46789) |
|||||||||||||||||||||||||
| Equalization and Cycle Service | 14.40~15.0VDC/unit Average @ 25ºC | ||||||||||||||||||||||||||
| Maximum Charging Current | 19.00A | ||||||||||||||||||||||||||
| Terminal | I4 (M6 stem) | ||||||||||||||||||||||||||
| Container Material | ABS (UL 94-HB) & Flame Retardant (94-V0) available upon request |
||||||||||||||||||||||||||
| Self Discharge | LONGWAY batteries can be stored for more than 6 months and the Self-discharge ratio less than 3%per month at 25ºC .Please charge batteries before using. |
||||||||||||||||||||||||||
1.Defect rates plummet to an astonishing 0.3%,leaving coompetitors in the dust at 3%!
2.Rigorous multi-stage quality inspections, nipping problems in thebud before shipping!
3.Sink into the luxury of an ultra-low self-discharge rate as low as 2.5%, granting a mammoth 12-month storage with zero maintenance!
4.Unleash unprecedented savings of up to 98% in maintenance costs for our cherished customers!
5.Harness the power of internalized battery crafting for unrivaledendurance in the long haul!
KaiYing Power Supply & Electrical Equip Co., Ltd. (LONGWAY Battery) was established in 2000 and currently has two major production plants with the factory area of over 100,000 m2, over 1000 employees, and an annual production capacity of over 2 million KVAH. Since its establishment, we have been committed to the development and production of high-quality battery products. Focusing on research and development, we are committed to the production, sales, and services of AGM battery and GEL battery.


Q: What is a Valve-Regulated Sealed Lead-Acid Battery (VRLA)?
A: A VRLA battery is a sealed lead-acid battery that utilizes internal oxygen recombination technology (oxygen recombines at the negative plate to form water) for maintenance-free operation. It is equipped with a safety valve to prevent excessive pressure buildup. There are two types: AGM (Absorbent Glass Mat) and Gel.
Q: How is a VRLA battery different from a conventional flooded lead-acid battery?
A: Sealed & Maintenance-Free: No water refilling is needed; the electrolyte is absorbed (AGM) or gelled (Gel).Oxygen Recombination: Minimizes gas emissions and allows horizontal installation (though upright is recommended).Safety Valve: Releases excess pressure to prevent swelling.
Q: Does a VRLA battery require an initial charge?
A: It comes pre-charged, but if stored for over 6 months, a supplementary charge is recommended before use (use constant voltage charging as per the manual).
Q: What is the correct charging voltage?
A:For 12V Batteries:Cycle Use: 14.4-14.8V (lower for Gel batteries).Float Charge: 13.6-13.8V (to maintain charge without overcharging).Always follow the manufacturer's specifications-excessive voltage can cause water loss or thermal runaway.
Q: How to determine if a battery is end-of-life?
A: Replace if:Capacity drops below 60% of the rated value.Voltage drops rapidly after a full charge (e.g., s12.0V for a 12V battery at rest).Internal resistance increases significantly (requires specialized equipment).
Q: How to store an unused VRLA battery?
A:Fully charge before storage.