Customization: | Available |
---|---|
Type: | Lead-Acid Batteries |
Usage: | Electric Power, Electric Bicycle |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Specifications: Designed according with the IEC60254-2014 | |||||||||||||||||||||||||||
Nominal Voltage | 12Volts (6 Cells per unit) @25ºC |
ISO9001:2015 ISO14001:2015 ISO45001:2018 ISO50001:2011 |
|||||||||||||||||||||||||
Nominal Capacity | |||||||||||||||||||||||||||
20hr -rate (3.75A) | 80.0Ah @ 1.75V per cell@25ºC (77ºF) 75.0AH @ 1.75V per cell@25ºC (77ºF) [email protected] cell@25ºC (77ºF) [email protected] cell@25ºC (77ºF) Approx.21.3 ± 3%kg(46.96lbs) |
||||||||||||||||||||||||||
10Hr-rate (7.50A) | |||||||||||||||||||||||||||
5Hr-rate(12.70A) | |||||||||||||||||||||||||||
3Hr-rate(18.70A) | |||||||||||||||||||||||||||
Weight | |||||||||||||||||||||||||||
Internal Resistance | Approx. 7.00mΩ full charged @25ºC 400A(3sec) |
||||||||||||||||||||||||||
Maximum Discharge Current | |||||||||||||||||||||||||||
Operating Temperature Range | Discharge: -20ºC~50ºC; Charge: 0ºC~40ºC Storage: -20ºC~40ºC |
APPLICATION STANDARDS ISO 7176-25 - 2013 IEC 60254- 1- 2005 SAE J1495-2018 UL1989 (MH46789) |
|||||||||||||||||||||||||
Equalization and Cycle Service | 14.40~15.0VDC/unit Average @ 25ºC | ||||||||||||||||||||||||||
Maximum Charging Current | 19.00A | ||||||||||||||||||||||||||
Terminal | I4 (M6 stem) | ||||||||||||||||||||||||||
Container Material | ABS (UL 94-HB) & Flame Retardant (94-V0) available upon request |
||||||||||||||||||||||||||
Self Discharge | LONGWAY batteries can be stored for more than 6 months and the Self-discharge ratio less than 3%per month at 25ºC .Please charge batteries before using. |
1.Defect rates plummet to an astonishing 0.3%,leaving coompetitors in the dust at 3%!
2.Rigorous multi-stage quality inspections, nipping problems in thebud before shipping!
3.Sink into the luxury of an ultra-low self-discharge rate as low as 2.5%, granting a mammoth 12-month storage with zero maintenance!
4.Unleash unprecedented savings of up to 98% in maintenance costs for our cherished customers!
5.Harness the power of internalized battery crafting for unrivaledendurance in the long haul!
Q: What is a Valve-Regulated Sealed Lead-Acid Battery (VRLA)?
A: A VRLA battery is a sealed lead-acid battery that utilizes internal oxygen recombination technology (oxygen recombines at the negative plate to form water) for maintenance-free operation. It is equipped with a safety valve to prevent excessive pressure buildup. There are two types: AGM (Absorbent Glass Mat) and Gel.
Q: How is a VRLA battery different from a conventional flooded lead-acid battery?
A: Sealed & Maintenance-Free: No water refilling is needed; the electrolyte is absorbed (AGM) or gelled (Gel).Oxygen Recombination: Minimizes gas emissions and allows horizontal installation (though upright is recommended).Safety Valve: Releases excess pressure to prevent swelling.
Q: Does a VRLA battery require an initial charge?
A: It comes pre-charged, but if stored for over 6 months, a supplementary charge is recommended before use (use constant voltage charging as per the manual).
Q: What is the correct charging voltage?
A:For 12V Batteries:Cycle Use: 14.4-14.8V (lower for Gel batteries).Float Charge: 13.6-13.8V (to maintain charge without overcharging).Always follow the manufacturer's specifications-excessive voltage can cause water loss or thermal runaway.
Q: How to determine if a battery is end-of-life?
A: Replace if:Capacity drops below 60% of the rated value.Voltage drops rapidly after a full charge (e.g., s12.0V for a 12V battery at rest).Internal resistance increases significantly (requires specialized equipment).
Q: How to store an unused VRLA battery?
A:Fully charge before storage.